Skip to main content
PA
PALO ALTO
2011 El Camino Real
Palo Alto, CA 94306
Phone: (650) 853-3000
Open: Mon-Fri 11-7 Sat 10-7 Sun 10-6
Like The Bike Connection on Facebook! 
SF
SAN FRANCISCO
1090 Folsom St
San Francisco, CA 94103
On-Site Parking
Phone: (415) 934-8000
Open: Mon-Fri 11-7 Sat 10-7 Sun 10-6
Like The Bike Connection on Facebook! 

Filter By:

  • Show More Brands

  • Show Fewer Brands

Lighting

$7.99
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$9.99
Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.
$6.99
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$6.59
- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 12
$6.59
- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6
$7.99
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.
$7.99
• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body
$9.79
- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design
$9.79
- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment
$8.99
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
$4.99
- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light
$7.99
• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body
$4.19
- Rack mount bracket only - Fits TL-L225 taillight
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
$5.99
- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars
$5.99
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$6.99
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
$6.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
$5.99
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
$3.59
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
$3.59
Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.
$3.59
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
$8.99
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
$4.25
Recon-E Light to Bosch motor unit connector cable.
$5.00
- Replacement aero mount for Numen light
$5.99
A universal quick release mount that attaches to round-shaped drop and flat handlebars.
$4.25
Recon-E Light to Shimano motor unit connector cable.
$3.00
Updated and more secure clothing clip for mounting CatEye safety lights.
$9.95
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$5.95
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
$5.95
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
$9.95
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
$3.00
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
Page 1 of 1